Elegance by adler 600 - Oak Natur, Fumé G30 Classic
Wire brushed and natural oiled
Short-plank Natural Oak (Old German Plank), textured/naturally oiled finish, 10 mm thick, 100 mm wide, 600 mm long, with a wear layer of 4.0 mm. The Elegance by adler 600 oak planks, which are also available with PEFC and FSC® certification upon request, are suitable for use with underfloor heating when installed with full-surface gluing.
Informations about Product
| Product line | Elegance by adler 600 |
| Wood specie | Oak |
| Color | Natur, Fumé G30 |
| Grading | classic |
| Structure of Surface | wire brushed |
| Finishing of Surface | natural oiled |
| Bevel | 4 |
| Wear layer in approx. mm | 4,0 |
| Thickness in mm | 10 |
| Width in mm | 100 |
| Length in mm | 600 |
| Type of Parquet | German Strip |
| Construction | 2 layer |
| Core material | Spruce |
| Type of Wear Layer | Hardwood |
| Color Shade | light |
| Installation | Full Spread Gluing |
| Herringbone | yes |
| Suitable for underfloor Heating | yes with full spread gluing |
| Thermal Transfer Resistance in m²k/W (EN14342) | approx. 0,079 – 0,090 |
| Classification of Fire Resistance (EN 13501-1) | Cfl-s1 |
| German General Technical Approval | Z-156.607-800 (19.04.2018 - 14.04.2020) |
| Emission of Formaldehyde (EN 717-1) | E0 < 5 µg/m³ |
| Emission of PCP (CEN / TR 14823) | < limit of detection |
| Other Values of Emission (VOC, SVOC, etc) | below the limits of ECO label |
| Certification | PEFC and FSC® |
Wood is a natural product
Since wood is a natural product colours and textures will vary. Samples and pictures should therefore be regarded as typical, not binding. The effect of sunlight will over time also affect natural changes in the hue of the wood. The product may therefore clearly differ from the sample you were shown by the time it is delivered.
Sorting will be arranged separately in the sorting descriptions.
For more detail on ambient room conditions, notes on laying (especially with underfloor heating) and on care, please refer to item “All about Parquets” in the menu.
Printing errors and technical changes reserved.