Ambiance by adler high quality single strip
Our single strip in walnut and oak
The single strip parquet is one of the classic versions of parquet and thanks to its great individuality with respect to possible installation patterns, structures and colour play, it is highly popular. The design possibilities are legion and there are scarcely any limits on creativity. This single strip allows you to install an irregular ship-style pattern or a regular pattern. A herringbone, cube and many other patterns are possible, if the single strips are available in right and left versions. The basic principle is that the size of the strips influences the look of the room. Long strips create a homogeneous, peaceful effect; small strips on the other hand produce a dynamic, lively atmosphere. Colour-play through a combination of different species of wood and different grades of wood creates possibilities for a unique surface pattern. Parquet flooring based on single strips gives a feeling of space, is durable and satisfies every requirement for a sophisticated wooden floor.
Our Ambiance by Adler single strip with its 560x70x10 mm size is one of the longer strips on the parquet market. This means that our Ambiance by Adler creates a homogeneous, peaceful effect in your living room. We process top layers in a minimum of 4 mm from oak, smoked oak or walnut to produce this high quality, two-layer single strip. The core construction creates massive spruce strip. Ambiance by Adler is manufactured with no bevel and is treated with our natural warm, yet hard-wearing NATURA+ oil surface. The oak strip is also available varnished.
Ambiance by adler: the selection of various deciduous woods at a glance
Once again here is a brief overview of the colours of the various woods.
The images can only give an impression of the colours and structures of the actual wooden flooring and are not binding, since wood is a natural product and colours are therefore dependent on the structure and the properties of the wood.
What you should know about Ambiance by adler
This strip is free of additional formaldehyde. It has general building authority approval and complies with fire protection class Dfl-S1, and as oak strip even the higher classification, Cfl-S1.
Important note: As standard we supply only right strips. If you want a herring bone or cube pattern, please state this when ordering.
Here you will find some more useful information. You will find all the technical details in the PDF document, the Technical Product Data-sheet, which you can download from our Infothek.
You can install our Ambiance parquet strip also in the very trendy herringbone or Chevron pattern. We then have to produce left and right handed pieces for you.
For the traditional normal herringbone pattern we still have the standard size of 560x70x10 mm.
If you decide on the Chevron design with the 45° angle, then we produce the dimension 490x70x10 mm.
The short strip in oak is also available in our UV-cured acrylic varnish.
Otherwise our surface treatment is based on out high quality NATURA+ oil oxidatively oiled surface.
For private use your NATURA+ oiled wooden flooring is ready for you to move in immediately after it has been installed. If the wooden floor is to be subjected to further stress, which is principally the case, when the rooms are used for commercial purposes, we recommend a finishing treatment after installation. More detailed information on this is available under About Parquet / NATURA+.
Wood is a natural product. Differences in the substances in the wood and the wood grain can lead to colour deviations in colour treated surfaces. These differences in colour can also occur between different product batches, as well as within a single product batch. This applies in particular to coloured surfaces, since the smoking, staining, lyes and the application of colour pigments can cause variations in shades because of the structure of the wood. However, this is a mark of authenticity for wood as a natural product.
The Ambiance by adler single strip is two-layer and must be installed with total glue down.
By virtue of this construction and the low overall thickness the thermal resistance of this parquet element is approx. 0.079 - 090 m²k / W (pursuant to EN14342). This makes it ideal for installation on a hot water based underfloor heating system.
A maximum temperature of the subfloor of 23°C – 28°C should not be exceeded. Please consult our About Parquet installation instructions for the precise guidelines on installation on underfloor heating systems in the Download field and the information in About Parquet.
So that you have a lot of enjoyment of your multi-layer parquet, you must give it the appropriate care.
The varnished version must also be properly cared for. You will find hints on care in our current Care Instructions, which can be downloaded from the Infotheque.
You should also ensure that you have a healthy indoor climate, not just for your parquet, which consists of wood, a living natural substance, but also for yourself. This means a relative air humidity of approx. 40 – 60% and a pleasant room temperature of 19 – 22°C.
If the air humidity and temperature drop below these reference values, this may cause great harm to your wooden floor.
If you require it, we can also produce your Ambiance by adler flooring as a PEFC certified parquet; if there is sufficient FSC® certified wood available, then a FSC® certified parquet is possible.
Do you know our Elegance by adler 600?
Our short strip plank Elégance by adler 600 is also ideal for you individual parquet flooring. We offer this short plank in four different oak colour nuances and surfaces and in walnut